Guest 65wildcat Posted March 12, 2006 Posted March 12, 2006 hi i recently purschased a 1965 2 door hardtop with a black interior and car needs a lot of parts i like good used orginal or NOS if possible here is what i need e-mail me with what you have,prices, conditions to crownvictoria97@aol.com or here but prefered there i need parts & options to here goes list.front bumper, front bumper turnsignals, front right & left eyebrow chrome moldings, windsheild, wiper blade heads, front fender corning lights complete assemblies, engine wiring harness for v8 401, fan shroud, rear bumper, rear left fender extion, taillights, license plate light, backup lights, rear fender extions chrome trim left & right side, driver remote mirror, passenger mirror, trunklock, all elblems outside car, vinal top materical black color, inside car need a complete black interior looking for bucket seat with console setup with floor shift setup as this car is a bench column shift car right now, tilt column for column shift & need one for floor shift, black sterring wheel, dashpad top, package tray, front & back seat blets, door panels for power window setup rear quater panels & all inside trim, headliner, carpet, door still plates, sail panel lights & lenses, tack for dash, door jam buttons, dash wiring harness, power antena, power window motors, trim plate in center of dahs for a/c cut out also for power antena & acc cut out in it, black dash trim, cruise control setup, vaccum trim relase setup, rear window defogger setup, options stuff like orgianl floor mats good used or nos black front & back, litter basket, compass, sun visor mirror, rally wheel centers, orginal dual exhause setup for 1965, horns, anything you might have let me know thanks
DualQwad Posted March 12, 2006 Posted March 12, 2006 It sounds like you bought something in pretty rough shape. I hope you didn't spend much on it. You might be better off looking for another complete parts car as a donor. Let me check my stash, I'm pretty sure that I might have a few extra things. In the mean time, the windshield should still be available new from any local PPG glass supplier near you.
Guest 65wildcat Posted March 12, 2006 Posted March 12, 2006 ok please reply to my e-mail address crownvictoria97@aol.com. let me know what you have i don't have a please to store a part car i live in nyc my 65 in on the street so i parts only be good for me thnaks
Guest 40series Posted March 13, 2006 Posted March 13, 2006 I have parted 2 65 Wildcats and have many of the parts you need. Please email or send a private message with your contact info and I can go over the list.
Guest 65wildcat Posted March 13, 2006 Posted March 13, 2006 hi please send me a list or your phone number to call about parts my e-mail address crownvictoria97@aol.com
Guest 40series Posted March 15, 2006 Posted March 15, 2006 I will put together a list of the parts but the one car is complete. both are 4 doors.
mpneroz Posted March 16, 2006 Posted March 16, 2006 Looking for right rear 1/4 moulding from the door back, including the wheel opening moulding for my 65 LeSabre 400 conv. nerozzi01@aol.com
billda Posted July 15, 2006 Posted July 15, 2006 I just listed a whole car. 65 Convert. 465 switch pitch. 610 247 3420
Guest gino70c Posted July 15, 2006 Posted July 15, 2006 Hi, In reference to your 65, I have a driver outside remote mirror complete. Very great condition. Mechanically working condition, great chrome with no pitting. The mirror glass has very slight scratches (normal for the age) I am asking $45 + shipping. I also have another one complete & in good driver condition, good mechanical working condition. Chrome has small pitting on housing & arm. Mirror glass has nominal scratches. This one is $25 + shipping. If interested I can provide pictures. I have a 100% rating on Ebay. Thank you for your time, Gino...
95Cardinal Posted July 20, 2006 Posted July 20, 2006 I've got the front exhaust pipes for 401 duals - $170 for the pair plus shipping. They are aftermarket NOS parts. If we leave them in one piece, shipping will be expensive. We can cut them in half and provide connectors and you'll save 1/2 the shipping cost. The over-axle and tailpipes can also be made if you need them. The entire system - with resonators - will be $450 plus shipping (in aluminized steel). Stainless would be $850.Joe
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now