im trying to remove the stab. bar link..

[Guest spongebob]

from the lower control arm, but when i turn the nut, the

whole thing turns..now what?

and how important is the J34754 tool?

[Barney Eaton]

Look closely and you will see a Torx T-45 bit hole in the threaded stud. You will need to put the correct size bit in there to hold the stud while loosening the nut.

[Guest spongebob]

thanks barney..i was just getting the ole saws-all out....

[manikmekanik]

Oh, NO! Not the SAWS-ALL!

That's for removing fenders, windshields, crank pulleys, or steering wheels!!