Guest Posted February 19, 2001 Share Posted February 19, 2001 My Washer fluid resevoir no longer is holding the fluid. It seems to be a slow leak, but I'm not sure how to go about diagnosing the problem or fixing it. Any suggestions? Thanks! Link to comment Share on other sites More sharing options...
Guest Posted February 19, 2001 Share Posted February 19, 2001 I am not sure how you would diagnois a problem with the windshield washer resevoir but why not just replace it. They are only $11 and are still available from most dealers. If your dealer does not have one you can search one of serveral online GM parts places. I think they are held on by 3 screws....after you remove the support brace that runs across the top of it.<BR><P>------------------<BR> My Topless Reatta<A HREF="http://hometown.aol.com/drbuch2000/TheReatta.html" TARGET=_blank>http://hometown.aol.com/drbuch2000/TheReatta.html</A> Link to comment Share on other sites More sharing options...
Guest Posted February 20, 2001 Share Posted February 20, 2001 Sometimes the washer bottle will crack around the screws. Other times it can leak out of a seal where the pump motor goes in. The pump motor could be leaking. it could be a cracked or loose washer hose comming off the pump. If questionable just change that hose because it's cheep. I don't know if you can get the pump seal with out the pump. I know the pumps are not too expensive and can be had at a Napa. I would take the washer jug off and look for signs of leaking. <P>Tom Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now