Jump to content

30's-40's 9' long bed pu box wanted


Reg Evans
 Share

Recommended Posts

  • 1 month later...

Reg, send a drawing or photo of what you want the sides to look like. I may be able to fabricate them for you. I recently fabricated bed sides and end panel for a 1942 Dodge 1/2 ton pu. I also have experience working on the vintage power wagon boxes. John Worden 405 Green Mountain Road, Green Mountain Iowa 50632 Phone 641-474-2313 Thanks John Worden

Link to comment
Share on other sites

Guest BillP

Easy way would be to add some wood racks to poke into the stake pockets. In fact, that's what I have on mine.

If you built up higher sides out of sheet metal, of course you'd need a higher head board and tailgate. The taller tailgate would be a project, especially if you want to duplicate the stamped beading and the D O D G E in the center.

Link to comment
Share on other sites

I can use a stock tailgate from a 48 Dodge 1 ton which came with the taller bed sides. I would use the taller bed sides from the same type of truck but they have stamped ribs on the sides to match the motor cycle looking back fenders. I want to use the 39-47 rear fenders so the truck looks stock. The bed sides will need to have no pattern stamped on them like the stock 39-47 beds do.

Link to comment
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share

×
×
  • Create New...