Jump to content

Key hole light


wbtegra

Recommended Posts

The ring around the key hole on the doors are supposed to light up when the exterior door handles are pulled up. This feature worked on my first Reatta but not on the one I currently own. Does anyone know how to fix this problem?

Link to comment
Share on other sites

Fiber optic cable probably popped out of it's connector if all other door and courtesy lights work okay. Take the door panel off (see speakers on the FAQ page and follow instructions I left for Jim here: <A HREF="http://www.aaca.org/ubb/Forum3/HTML/001138.html" TARGET=_blank>http://www.aaca.org/ubb/Forum3/HTML/001138.html</A> <P>If other courtesy lights are not working in that door, then it's the bulb or a kink in the cable. If lights are out in both doors, check for a fuse or bad bulbs.<BR>Good luck.

Link to comment
Share on other sites

Consultant_1 is right on the money.<BR>I had to change mine recently and the bulb lives behind the door panel right in the middle of the door. It uses the same kind of bulb as a side marker light.<BR>I have a couple of suggestions 1. Go to the local parts store and buy a door panel tool (about $5.00) it allows you to remove the plastic pushpins in the door panel with out tearing them up. If they are already broken you can get a new set from GM mine cost $18.00 for both door panels (each panel requires 18 plastic push pins)<BR>Good Luck,<BR><P>------------------<BR>Jim

Link to comment
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
×
×
  • Create New...