Guest Shaffer Posted April 3, 2005 Share Posted April 3, 2005 The other day, we (my dad and I) were going to change the rear shocks on my 73' Pontiac, but ran into some difficulty. When we tried to loosen the bolts on the top of the shocks, they were turning, but it seems as if there are nuts also turning on the top. Seems to be in an impossible area to get a wrench on, but someone on the Pontiac site said it was easily done, as they have changed these on their 74' Pontiac. I am guessing this setup was the same for all of the 71-76 full-size Chevrolet, Pontiac, Oldsmobile, Buick and Cadillac, but I am not sure. Does anyone have any advice on the best way to change these? I would hate to have to take it to a shop to have them changed. I want to put the original shocks back on it, as someone had installed heavy-duty shocks on it most recently. I know that they also changed the springs as well. Thanks for any information/advice. Link to comment Share on other sites More sharing options...
sledheader 48381 Posted April 3, 2005 Share Posted April 3, 2005 worked at GM dealers for years have a method I use, think its the same for many years, gets a little involved if I can help give me a call at 248 676 2530 am in Detroit. Don Link to comment Share on other sites More sharing options...
Guest Shaffer Posted April 5, 2005 Share Posted April 5, 2005 Thanks for the offer, but I took it to the shop and had them installed. I am disappointed though. It rides rougher than it did with the Monroe shocks. I do not understand. (See other thread) Link to comment Share on other sites More sharing options...
66400 Posted April 6, 2005 Share Posted April 6, 2005 Too late now but if you remove the rear tires it gives you access to reach over the top of the frame to put a box end wrench on the upper shock bolt.Henry Link to comment Share on other sites More sharing options...
Smartin Posted April 7, 2005 Share Posted April 7, 2005 It's a bit of a headache, but the worst part is all the dirt and rust falling into your face when you're under the car. I've done it 3 times on my cars...usually takes me about 45 minutes. Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now