xschx Posted July 21, 2002 Share Posted July 21, 2002 I am pulling a 322 nailhead out of a 56 Special and I am wondering what exactly is bolted that i have to unbolt to get the thing to come out. I have the 2 motor mounts done already. Link to comment Share on other sites More sharing options...
Bill Stoneberg Posted July 21, 2002 Share Posted July 21, 2002 Do you have all the wires undone ?<BR>How about the transmission ? Is it coming out at the same time ?<BR>Bell housing bolts ? If not.<BR>Accelerator linkage ?<BR>Fan and Radiator out ?<BR>Starter out ?<BR>Battery Disconnected, ground strap disconnected ?<P>These are just a few, if you can give us more info, we will be glad to give more ideas and help.<P>Good luck. Link to comment Share on other sites More sharing options...
xschx Posted July 21, 2002 Author Share Posted July 21, 2002 yeah i am trying to take everything out at the same time. I know a guy who does skylarks all the time with no problem. i guess the tranny just rests on a cross member? This is the first engine pull for me so i don't know. this one looks like it might be bolted to a mount of some sort. I just know this isn't going very smoothly. I am going to cut the exhaust as close to the manifolds as possible and then hopefully just yank the thing out. Link to comment Share on other sites More sharing options...
xschx Posted July 21, 2002 Author Share Posted July 21, 2002 oh yeah, so far i have the radiator and hoses out, the fuel line disconnected, the wiring is undone from the generator and firewall. I still need the accelerator undone. Link to comment Share on other sites More sharing options...
Guest Posted July 23, 2002 Share Posted July 23, 2002 Do you need to service the dynaflow or can it stay behind?<BR>I'm local... email me and I'll forward my number and you can call me. Link to comment Share on other sites More sharing options...
Guest Posted July 23, 2002 Share Posted July 23, 2002 Sorry for that last one...<BR>Reach me at jim.comeau@rfsamericas.com Link to comment Share on other sites More sharing options...
Bill Stoneberg Posted July 26, 2002 Share Posted July 26, 2002 Did you get it out ? Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now