Wondering If These Numbers Will Help Find Engine Model????

[Church]

Hello All,

I know I have a 6 cylinder in my 1928 5 Window Coupe but I can not tell what the model is so I can order parts. Here are some numbers off the engine that might help tell what the model is. Off the Water Pump 210303, Off the Heads 210100 and 11428, Off the Manifolds 210403, Off the Water Neck 210104. If anyone knows if this will help please get back to me I need to oreder some partss.

Thanks

Ronnie and Tanya

[JB-ed]

On the vertical milled surface of the block, just ahead and/or above the manifold will be the engine number, die cut (stamped) in about 1/2 inch high letters and numbers. You need to clean off the crud of ages to see it, but it must be there. Use a wire brush and solvent if need be, because the numbers are stamped into the surface of the block and no doubt are filled with grease and dirt. All those numbers you have published are cast part numbers and mold numbers for the various components.

[Guest imported_DodgerDave]

Hi Guys,

Just adding a note: you may also find the frame # behind the right

front spring rear shackle. again as the "ed" stated wire brush and

solvent should be used. When you retrieve these numbers post them and you will get your model identity.