CBoz 22 Posted May 15, 2004 Share Posted May 15, 2004 A few weeks back, we were discussing the disadvantages of current heavy weight gear oils with sulphur additives. Turns out there is a guy who has some 90W mineral oil to sell by the gallon:John Koutre, 2331Rainbow DrivePlover, WI 54467715-341-6188More info and his email is available here: http://cgi.ebay.com/ebaymotors/ws/eBayIS...RK%3AMEBWA%3AITI don't know how much more he has to sell, but I'm buying a couple gallons at $19.96 (shipping is additional, but doesn't have any hidden "packaging" charges). You might give him a call or email if interested. Who knows, he might even be able to line up more if there is enough demand. Link to post Share on other sites
imported_Phil Knapp 1 Posted May 19, 2004 Share Posted May 19, 2004 I just talked with Dan Krehbiel and asked him about lubricants for Columbias. Dan says that the lubricants available today are far superior to that which was available in the '30s and '40s and he uses the newer multi-viscosity 85/140 gear oil in his own cars. Since it gets pretty hot here in Texas, I'm planning to use straight 140w in my "new" Columbia, just like I used forty years ago. I never had a failure from lack of lubrication in thousands of miles in my '39 and '47 Fords. However, I did manage to crack a few spider carriers by dumping the clutch behind my Chevy 283 engine! The car still ran just fine, but no more overdrive. I'm older and (hopefully) wiser now and I expect this Columbia to outlast me! Link to post Share on other sites
Zephyrparts 0 Posted May 22, 2004 Share Posted May 22, 2004 Hi, we carry 90 W mineral oil. It's only for transmissions. It can not be used in a rear axle. The price is $9.95/quart. It might go up slightly do to oil prices but we do have it in stock. -George Trickett Link to post Share on other sites
CBoz 22 Posted May 23, 2004 Author Share Posted May 23, 2004 Hello George -Is your comment about not putting mineral oil into rearends also true for non-hypoids with the Columbia? I just got a '37 parts car with the factory Columbia and I want to put the right stuff in it. If not the mineral oil, what would you suggest? Link to post Share on other sites
5 Star 0 Posted May 23, 2004 Share Posted May 23, 2004 In searching for 90 to 90 W 140 weight mineral oil, try your New Holland farm supply dealer. It goes under the label of TDH, "Transmission, Differential, Hydraulic oil. Used in the 9-8N Ford tractors, and others as well. Search this out and see if it meets your specs. In Canada its sold also at the Canadian Tire stores, happy motoring. Link to post Share on other sites
JT 1 Posted May 24, 2004 Share Posted May 24, 2004 I have bought trans lubricant (non hypoid) from Penrite http://www.penrite.com.au/ that has a dist in Texas. Don't know if they have any specific info on columbia rear ends but they do list non hypoid gear lubricants. Link to post Share on other sites
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now