fatboy Posted March 8, 2004 Share Posted March 8, 2004 Ok...i ran the codes on my car. These are the ones that showed up...E041 current and history, B477 current, b466 history, c331 history, c553 history. What do those mean and how can i find out if i need a oxygen senser, because on the screen, there was a bunch of stuff and oxy was one, and that little arrow was highlighted. What does that mean? Link to comment Share on other sites More sharing options...
FlyByNite Posted March 8, 2004 Share Posted March 8, 2004 What you need to do is go to www.reatta.net and download the Factory Service Manual. All error codes are listed with diagnostic tips and hints. If you are on a slow dialup connection, pm me and I'll get them to you on cd. Link to comment Share on other sites More sharing options...
padgett Posted March 8, 2004 Share Posted March 8, 2004 Code 041 is the dread cam sensor error. This means the ESC is not receiving the cam sensor signal and can be caused by a wiring problem, a bad sensor, or the cam magnet (interrupter) has fallen off of the cam sprocket.If the latter, the dealer will tell you that the timing cover must come off and you may need to mortgage the farm. (If thinking about replacing the timing chain it is a good excuse).OTOH you might try this. B446 and 447 relate to detection of low pressure in the a/c.The others may occur if you disconnect the battery.Arrow on O2 means it is not cycling. After a minute or so it should start flashing. Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now