Guest Posted February 23, 2004 Share Posted February 23, 2004 Doe's aneyone out there have a wiring schematic for a 90 IPC? I have one with a burned up part in it ,that I can't identify.If I can tell what it is I should be able to replace it and make it work. Link to comment Share on other sites More sharing options...
FlyByNite Posted February 23, 2004 Share Posted February 23, 2004 Factory Service Manuals are at www.reatta.net . Link to comment Share on other sites More sharing options...
Jim Posted February 23, 2004 Share Posted February 23, 2004 The schematics for electrical parts are not in the manuals, only the external wiring. Unfortunately I also have several bad IPCs and no schematic. Link to comment Share on other sites More sharing options...
Guest BobbyBubba Posted June 4, 2012 Share Posted June 4, 2012 I'm just guessing here- shouldn't a reputable tv repair shop- be able to work on these- even the CRT's ? They're had to be schematics when created, right? Woulda been nice- if they had just microfeched it- and stuck it to the inside of panel- for future repair- like old radios & tv's used to be. Link to comment Share on other sites More sharing options...
Guest steveskyhawk Posted June 4, 2012 Share Posted June 4, 2012 Bobby and all,The schematic for the crt is unavailable from Zenith, GM etc. I have an overhaul shop that has re-written the schematic, identified and sourced the components.I have overhauled CRT/touchscreens with a 2 year warranty available in my eBay store. Link to comment Share on other sites More sharing options...
KDirk Posted June 7, 2012 Share Posted June 7, 2012 I imagine Delco authorized speedo service centers were issued schematics and parts lists for all the clusters and components that needed repair. These were never issued to the public (GM has managed to keep these very close to the vest) so us mere mortals have no access to them.I have figured out the common failure points in the 90/91 IPC's and the parts needed, but have not gotten enough clusters rebuilt and stocked yet to offer any for sale. The blackout condition is the result of the high voltage VFD power supply burning up. There a several capacitors, a coupe of diodes and a few transistors that all need replacement when this happens. At this point, I would recommend buying a rebuilt cluster, or a known working used one. With the latter, you are taking a chance it may only last a short time, as one that is all original (20+ years old) could go any time. Then you have another paper weight. Rebuilt IPC's are more costly, but you have some piece of mind that they will work for years to come. There are also shops that will repair the Reatta IPC and CRT if you have a spare to send out, or can lay up the car while the repairs are done. KDirk Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now