597HP 568TQ Buick 464ci for sale

[Guest Scott Marencic]

I have decided to sell my 464ci engine.

It makes 597 HP @ 6000 RPM and 568 TQ at 4600 RPM, I have the dyno sheets available.

It was built by PAE Enterprises, El Paso, TX. http://www.paeenterprises.com

The details are as follows -

Heads & valvetrain- Ported TA stg 2 street eliminators. Flow is 317 cfm intake, 260 cfm exhaust.

T&D roller rockers (the silver and gold ones)

Poston "Buick" valve covers, black powercoat finish

Intake - port matched TA SP-1

Carb - 1000 cfm race demon

Block prep - 3/4 fill of hard blok, bored .038" over

Cam - Straightline performance 254/268 @ .050, .550/.575 lift 112lsa

Crank - stock crank, knife edged, lightened by 6 lbs. rods turned .100" under for BBC rods

Rods - Eagle H-beam BBC rods, 7.100"

Pistons - Ross reverse dome pistons, 11:1

Exhaust - TA Super Competition stg 2 headers, 2 1/8" primaries, 3.5" collectors. Ceramic coated by HPC.

Bearings - 3/4 grooved mains, grooved cam brgs

Other items

MSD Pro-Billet Distributor

Romac SFI Balancer

Poston girdled oil pan

Bearings, Pistons, and springs are dry film lubricant and thermal barrier coated

SFI approved flexplate

The motor would come with everything listed above, plus the following -

Water pump (stock replacement)

Pullies

A/C and Alternator Brackets (if needed)

I am asking $7499 for the engine.

Pictures are available at http://68.83.10.185/464pics/

If you have any questions, or want to make an offer, please email me at LDPosse@juno.com.