Tim Wolfe Posted August 23, 2003 Share Posted August 23, 2003 Looking for a supplier of shock insulators. Has anyone purchased and installed these from Scott's in Australia? Steele's show them but ask for the old ones to be sent to them and mine are about all gone. Can anyone help? wolfe@wesnet.com Link to comment Share on other sites More sharing options...
Doug McKay Posted July 18, 2004 Share Posted July 18, 2004 Good question.I have a 1928 "72" and have tried all the above suppliers with no succcess as I don't have the originals to use as patterns.There are 72s and 75s out there on the road so someone must have the answers.Information please.Doug McKay. Link to comment Share on other sites More sharing options...
LENS31CHRYS Posted July 20, 2004 Share Posted July 20, 2004 If this is a rear axle bumper you may want to try oldmoparts.com. You may be able to adjust the holes if they don't match. They are only $16 a piece, so it may be worth a try?Good Luck Len Link to comment Share on other sites More sharing options...
Tim Wolfe Posted July 22, 2004 Author Share Posted July 22, 2004 Bought my shock insulators from Steele Rubber, a bit on the expensive side- $500+. But, they look like they will fit. Might have to order another set for our other car. Give them a call, it looks like they have them in stock and packaged in sets for different car models. Link to comment Share on other sites More sharing options...
Doug McKay Posted August 31, 2004 Share Posted August 31, 2004 I contacted Steele Rubber Vice President W Vaughan on wvaughan@steelerubber.com and he was extremely helpful, coming back to me very promptly with their parts numbers for my 1928 Chrysler "72'.I then placed my order by email to Cynthia Dancoff at cdancoff@steelerubber.com and the parts were here in Australia in about 10 days.They fit perfectly and I am very pleased with the service I received from Steele Rubber.As far as I can see, as I also have a 1930 V70 chassis, the spring insulators for your 1930 "70" should be the same as for my 1928 "72".If that is the case the parts numbers should be the same.On that assumption,if it is of assistance,the parts numbers for my order were as follows:4 each 40-0527-982 each 40-0528-982 each 40-0531-98Please let me know how you get on with your order and the progress of your car generally as I am interested in anything to do with vintage Chryslers.Regards, Doug McKay. Link to comment Share on other sites More sharing options...
Tim Wolfe Posted December 7, 2004 Author Share Posted December 7, 2004 Ordered parts from Steele and they look as if they will fit, will order a second set for our other car. We are now trying to locate new bottom seal for the roll up windshield used on these cars. The one that is sold by Steele doesn't fit, it is for a Fisher body. Ours are Northway and Murray bodies. Sorry for such a long delay in the response! Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now