Jump to content

Recommended Posts

Posted

Camshaft gear is   1 5/8  inches thick.  1  1/4 inches of the teeth width are made of fiber.  mounting bolt pattern is  1  5/16  center to center with one hole offset.  outside diameter is  7 3/8  inches  with 66 teeth.   I hope someone has one or knows a good place to have one made.  thank you

IMG_20240904_115846556.jpg

IMG_20240904_115813790_HDR.jpg

Posted

Simple to make…….just add dollars. Let me guess, motor was rebuilt but the people building it didn’t adjust for the gears when they line board the crank. Looks like it was run too tight.

  • Like 1
Posted

That's what we are doing, making a new one 

Someone didn't tighten the mounting bolts and it wobbled.  They safety wired loose bolts 🫤

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
×
×
  • Create New...