JohnnyMaryjo Posted February 16 Share Posted February 16 the brake issue if I am going straight and put on the brake it is fine no pulling toward the right if I am making a left hand turn and hit the brake it is fine no pulling toward the right but if i and turning toward the right and hit the brake it will pull toward the right really hard and sharp ? ? Johnny Link to comment Share on other sites More sharing options...
Oldtech Posted February 16 Share Posted February 16 Is the wheel bearing loose - allowing the wheel to pull in a bit binding the brake? Link to comment Share on other sites More sharing options...
TerryB Posted February 16 Share Posted February 16 Front brake hose problem? One could be restricted when the wheels are turned. 2 Link to comment Share on other sites More sharing options...
Pete O Posted February 18 Share Posted February 18 Loose backing plate? 1 Link to comment Share on other sites More sharing options...
ply33 Posted February 19 Share Posted February 19 The brake drums and hubs are riveted together into a single assembly. For front an incorrectly adjusted wheel bearing could allow the drum to come out of alignment. For the rear, an improperly tightened axle shaft nut would do the same. 1 Link to comment Share on other sites More sharing options...
61polara Posted February 19 Share Posted February 19 I would look at your suspension for worn parts as well as the wheel bearings. I don't think this is a brake issue. 2 Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now