Reaper1 Posted July 27, 2023 Posted July 27, 2023 It's been a while since I posted. Life and other reasons. Anyways, I was doing some work to my '89 16V car and noticed the outer CV boot on the one side has just started to fail. I have asked Rick, AJ and Jackson if they know of a replacement PN, but they do not. I also did a search before posting this question and nothing comes up for the 16V cars (they use unique axles). I don't know if Hemi or anyone else might know. I can say with 99% certainty that the TII boots will not work. They are too small in diameter. I have a spare set of axles someplace, but I can't seem to find them right now. Thanks for any help.
Hemi Dude Posted July 27, 2023 Posted July 27, 2023 10 hours ago, Reaper1 said: It's been a while since I posted. Life and other reasons. Anyways, I was doing some work to my '89 16V car and noticed the outer CV boot on the one side has just started to fail. I have asked Rick, AJ and Jackson if they know of a replacement PN, but they do not. I also did a search before posting this question and nothing comes up for the 16V cars (they use unique axles). I don't know if Hemi or anyone else might know. I can say with 99% certainty that the TII boots will not work. They are too small in diameter. I have a spare set of axles someplace, but I can't seem to find them right now. Thanks for any help. PM to you in upper right ENVELOPE 1
marty14 Posted July 28, 2023 Posted July 28, 2023 1989 part book NOTE : For 2.2L Turbo II See Assy. 4425009 on Chart (See Fig. 2-1500) NOTE (1): For Shaft Identication And Major Componets. (See Fig. 2-1500) 1 SHAFT, Drive w/Circlip 04505921 1 Rt.-Lt., w/2.2L Turbo II (GKN) 2 RING, Shaft Outer 05212566 AR w/2.2L Turbo II (GKN) 3 BOOT PACKAGE, Outer 04384706 2 Rt.-Lt. w/2.2L Turbo II (GKN) 4 JOINT, C.V. Outer 04384734 2 Rt.-Lt. w/2.2L Turbo II (GKN) 5 05212536 2 SLEEVE, Outer Joint 6 05212535 2 SEAL, Outer Joint 7 HOUSING, C.V. Inner 04505905 2 Rt.-Lt. w/2.2L Turbo II (GKN) 8 SPRING, w/Cup 05212675 2 w/(GKN) 9 TRIPOD PACKAGE, Inner 04384709 2 w/2.2L Turbo II (GKN) 10 BOOT PACKAGE, Inner 04505907 1 Rt. w/2.2L Turbo II (GKN) 04505904 1 Lt. w/2.2L Turbo II (GKN) 11 WEIGHT, Damper 05212767 1 w/(GKN) 12 05212991 1 YOKE, Inner 13 04384514 1 JOINT PACKAGE, Intermediate Shaft 14 05212992 1 SHAFT, Inner 15 05212932 1 BEARING, w/Bracket 16 05212964 1 SEAL 17 05212962 1 SLINGER, Inner 05212975 1 Outer 18 04504007 1 BRACKET, Inner Shaft 19 06101299 2 SCREW, w/Washer 20 06500158 2 SCREW, w/Washer
Reaper1 Posted July 28, 2023 Author Posted July 28, 2023 Hemi Dude, I will have to get back under the car and take some pictures. I don't think mine looks like that what you PMd me.
Reaper1 Posted July 28, 2023 Author Posted July 28, 2023 Marty14, my car is a 16V car. They use different axles, including the outer CV it appears. I had already bought the larger of the CV boots for the TII and it doesn't appear to be large enough.
Hemi Dude Posted July 28, 2023 Posted July 28, 2023 Interestingly, the parts catalog does not specify “with Getrag trans” but merely ’manual’. It it’s as though they disregarded that option on the ‘Q’ body.
Reaper1 Posted August 17, 2023 Author Posted August 17, 2023 OK, sorry I've been MIA. Life was going on. Anyways, I FINALLY found my spare axles, but unfortunately they have the same issue...outer boots are trash. BUT, this did allow me to get measurements and markings. Firstly, they are DEFINITELY GKN. The large part is 3.5" (88mm), the small part is 1.12" (28mm) roughly 3.7" long (94mm) 3 bellows. The only markings on it are: GKN, England and 86 87 88. The clamps also had some markings. Small one: GKN A08754-010 34 Large one: 102 For reference, the smaller boot is also GKN. Large part is 3.33" (85mm) Small part is 1.12" (28mm) roughly 3.4" long (85mm) 3 bellows No markings other than the GKN. The axle itself is has PN 4425009 (also marked England) Maybe that helps?
Reaper1 Posted August 17, 2023 Author Posted August 17, 2023 @marty14I suppose I owe you an apology. It looks like the PN that is on my axles is the one you posted. It looks like maybe they marked them wrong in the book as TII, because they are DEFINITELY 16V. For what it's worth I did just try to cross reference the PN listed in your post at all the major auto parts stores online and got 0 returns. Even a Google search got me nothing. Yay...ugghhh...
marty14 Posted August 17, 2023 Posted August 17, 2023 all numbers starting with 4425 are 16 valve part numbers..................... The axle itself is has PN 4425009 (also marked England) 1
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now