Turbocharger gasket

[no1parfive]

Referencing previous posts, I finally was able to remove my cylinder head, intake/exhaust manifold, and turbocharger as one unit.  My problem with the removal was I had not disconnected the turbo coolant supply tube, which was well hidden under the turbocharger.  Anyway, after the removal, I discovered that two of the four nuts used to secure the turbo to the manifold was missing, and the other two were loose, to the point that I could physically shake the turbo.  After removing the turbo from the manifold, I discovered that the turbo gasket was missing about one third of the gasket material, which I assumed had been burned away, allowing exhaust gas to escape.  I'm also assuming this was the cause of my original problem, which was a loud hissing noise coming from the back of my engine when started.  I'm now trying to find a source to acquire a new turbocharger gasket. I previously ordered, and have received, a set of engine gaskets from RockAuto, but the turbo gasket was not included.  So, I'm now searching for a turbo gasket.  Any and all help would be appreciated in my search.

 

[Hemi Dude]

My only suggestion as I have looked at many vendors : rick@rdiperformance.com  He should have one if anyone does.

[no1parfive]

Have fabricated my gasket using exhaust system gasket material purchased from autozone, it looks to be the same material as my damaged gasket, again, I appreciate the help.