31 LaSalle Posted March 5, 2023 Share Posted March 5, 2023 I am wanting to change the oil in my 72s gearbox what grade of oil do I us Thanks in advance John Link to comment Share on other sites More sharing options...
viv w Posted March 5, 2023 Share Posted March 5, 2023 I've used EP90/140 for many years on my Chryslers. 1 Link to comment Share on other sites More sharing options...
lozrocks Posted March 6, 2023 Share Posted March 6, 2023 I run 140 in my 75 as well. 1 Link to comment Share on other sites More sharing options...
stakeside Posted March 6, 2023 Share Posted March 6, 2023 Does your trans have seals? My 29 dodge doesn’t and I use 600wt oil. Light weight oil will seep thru bearings. 1 Link to comment Share on other sites More sharing options...
BlueDevil Posted March 6, 2023 Share Posted March 6, 2023 Based on sidestake's comment, I looked and there are no seals in my 72 gearbox. I am going with 600W. 1 Link to comment Share on other sites More sharing options...
leomara Posted March 6, 2023 Share Posted March 6, 2023 Jay recommends 600W as well.... 1 Link to comment Share on other sites More sharing options...
maok Posted March 7, 2023 Share Posted March 7, 2023 Penrite Transoil T250 if its available near you. 1 Link to comment Share on other sites More sharing options...
viv w Posted March 7, 2023 Share Posted March 7, 2023 600W is used on Model A Fords. I read an article in their magazine's somewhere that 600W is the measurement to do with its steam rating, but in the same article they said EP140 is much the same oil. I stand to be corrected 1 1 Link to comment Share on other sites More sharing options...
pre1939chrysler Posted March 15, 2023 Share Posted March 15, 2023 600, 600,600,600,600.wt oil in trans and rear. And don't tell me, "well the book says to thin it in the winter". Yea, are you doing winter driving? Let it warm up, your sig. other will thank you. If it doesn't kool like and pour like honey, it AIN'T 600. Link to comment Share on other sites More sharing options...
ipeeforward Posted March 16, 2023 Share Posted March 16, 2023 John, I am using Penrite transoil 250 in my 75 mixed with a small amount of STP oil treatment. John 1 Link to comment Share on other sites More sharing options...
BlueDevil Posted March 16, 2023 Share Posted March 16, 2023 My Model A Ford dealer is pushing GL1500. Link to comment Share on other sites More sharing options...
lozrocks Posted March 21, 2023 Share Posted March 21, 2023 On 3/7/2023 at 5:38 PM, viv w said: 600W is used on Model A Fords. I read an article in their magazine's somewhere that 600W is the measurement to do with its steam rating, but in the same article they said EP140 is much the same oil. I stand to be corrected 600w oil and ep140 are not even close to being the same thing. 600w oil has the consistency very similar to honey. It's thickness allows it to adhere to surfaces. ep140 is only slightly thicker than engine oil. In Australia, 600w oil is very hard to purchase and ep140 works perfectly in my 75. 1 Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now