Engine mounted air pump

[dl456]

Hello,

Looking for an engine mounted compressor with a four bolt

 base. 2-11/16" x 2" centerline. I haven't been able to determine a manufacturer.

This is for a 22 Haynes model 55 and is driven off the generator shaft on the right side of the engine.

If you happen to know, please let me know.

Working or rebuildable core OK.

Thanks,

Dennis

[Gary_Ash]

Sort of like this?

 

 

 

[dl456]

Yes Gary,

Your 4-bolt base appears larger than what I need. Do you happen to know these dimensions?

I have sent an e-mail to the ACD museum as they did have one of these cars in their Indiana collection.

Trying to limit the search by manufacturer, model, etc.

Thanks for posting.

Dennis

[Gary_Ash]

Here are dimensions of the base.  We made a couple of reproductions for Ed Minnie's 1917 White.  Do you have a photo of what you are looking for?

 

 

 

 

[dl456]

No photo as mine is missing.

I hope to receive one from the ACD museum.

If there is a Haynes owner that could help that would be great as well. A fairly small group.

Your base is slightly larger than my baseplate.

I have a couple of extra Kellogg brand and they are larger as well.

I am fairly confident it was a single cylinder.

Thanks again,

Dennis

[Dale Tharp]

Good evening guys this is Dale out in Montana, I seen your article about the air pump, I do have a one cylinder in Ks. that looks real similar, I will be going there in a couple weeks if you call me or tex maybe we can make connection.  620 332 4932

[dl456]

Hello Dale

I sent you a pm

Dennis

[Dj59]

[dl456]

Photos above courtesy of the ACD museum,

This is the pump that I’m looking for,

Dennis

[dl456]

Can anybody help with this?

Check your practice shelf.

Thanks

Dennis

 

[Dale Tharp]

Good morning this is Dale was in Montana, I made it to Ks. and here is a pic. Of what I have, it looks similar but is straight up instead of being made at an angle. 

[dl456]

Hello Dale,

Can you measure the centerline of the mounting bolts?

I may be able to adapt this until I find the correct one.

I will call you later.

Thanks,

Dennis

[Dale Tharp]

Good morning,  yes I will try to get over there today and measure the air pump base. 

[Dale Tharp]

Good morning guys I did get some measurements yesterday. The base bolt holes on the compressor 3”x31/2”. 

[Dale Tharp]

Good morning is Dale again, I found the cloth braided air hose that thought I had, I don’t know if it is what would have came with the car or not. 

[Vin cassidy]

Hi did you find the correct pump that style looks familiar  in my pile of pumps Vincentcassidy1@gmail.com 

[dl456]

Hello Vin,

I sent you an e-mail.

Thanks,

Dennis