Jump to content

Window wiper problem


Recommended Posts

I seem to running into a dead end. I turn my wipers on and the motor functions it rotates the blades up about three inches and returns to the hide position randomly they will function normally. could this be a switch problem due because the switch only functions on the low setting and not the high<BR>it actually seems as if it was binding but see no evidence of this. I have replaced the motor and also once in a while in the off position it moves after wipers have been turned off. I appriciate all your help and advice.<P>thanks<BR>Phil

Link to comment
Share on other sites

It sounds like you have a bad ground. I replaced a switch because of this same problem and THEN found a loose ground wire that's supposed to attach at the switch behind the cluster. Give this a shot before you replace any more parts.

Link to comment
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
  • Create New...