Found and purchased -WTB - 1931 Buick Model 8-96S Marvel Heat Riser

[31Buick96S]

Good afternoon,

I'm looking for a serviceable Marvel Heat Riser for my 1931 Buick Model 8-96S. The one on the car has multiple cracks and worn out shafts.  After having the sleeves bored out per carbking's advice, I found the area behind the heat riser tubes is burned out and missing almost all the way to the throttle shafts, leaving no step for the sleeves to rest on. Attached are two photos of the piece. This is cross posted on the Buick Pre-War site. Appreciate any help.

Contact information:

Joel Taylor

cell# 609-364-2975

email: jdtaylor65@hotmail.com

Edited January 11, 2023 by jdtaylor65@hotmail.com
Found and purchased (see edit history)

[edinmass]

Might be a good project to cast using 3D printing for patterns.

[31Buick96S]

I want to acknowledge and thank Rand Broadstreet from Vintage Carburetor Ltd., 440-786-8141, www.vintagecarb.com. He contacted me shortly after I placed the post and supplied pictures and a description of the part I needed. I received the part today, only 12 days after the original posting. The part was well packaged and exactly as the photographs and descriptions depicted.