Tonz Posted December 28, 2022 Share Posted December 28, 2022 Hi all. Hopefully in the new year I am planning to put a new king pin kit in my 26 model 50. There seems to be lots of complete Chrysler kits including pins, bushes, pivot bearings, cotterd, shims and top plugs. They all look very much alike but cut short of specifying my 26 model. Has anyone found a kit that will cross reference to suit my 26 model. Link to comment Share on other sites More sharing options...
leomara Posted December 28, 2022 Share Posted December 28, 2022 Ask Jay, he may be able to help: Jay Astheimer 610-863-6955 astheime@ptd.net 1092 Constitution Ave. Pen Argyl, PA 18072-9706 Link to comment Share on other sites More sharing options...
DFeeney Posted December 28, 2022 Share Posted December 28, 2022 I would try Weymouth Auto Cellar in Mass. I think you will find it hard to find a complete set. If you disassemble yours there is a good chance the pins are not worn, just the bushings. A good machine shop could make both the pins and bushings. Take the axle out and use a press to remove the pins, or the machine could also take it apart. Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now