Angelfish Posted December 5, 2022 Share Posted December 5, 2022 This will become a recurring feature. I bought a 1957 Buick Special in pieces and now it's going back together. The first are these two bars. They were in the bag with the lower A arm bumper so I assume they're part of the front suspension. Link to comment Share on other sites More sharing options...
avgwarhawk Posted December 5, 2022 Share Posted December 5, 2022 Bump stop. Affix to the lower control arm. The other two metal pieces I don't know where these go. Link to comment Share on other sites More sharing options...
pont35cpe Posted December 5, 2022 Share Posted December 5, 2022 Are the outer holes tapered? They kinda look like side pieces of a shackle for a 47-55 Chevy pickup. Link to comment Share on other sites More sharing options...
JohnD1956 Posted December 5, 2022 Share Posted December 5, 2022 Might those strips be the base for the bump stop? That is the bump stop is attached to the center hole and then the assembly is attached to the lower control arm? Link to comment Share on other sites More sharing options...
Angelfish Posted December 5, 2022 Author Share Posted December 5, 2022 12 hours ago, pont35cpe said: Are the outer holes tapered? They are not. 2 hours ago, JohnD1956 said: Might those strips be the base for the bump stop? The bump stops fit in a little dish on the A arm. The bars were in the same bag with the stops leads me to think they're related but I sure can't find anything. Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now