Banditomerc Posted October 1, 2022 Share Posted October 1, 2022 (edited) 1948 Ford Tudor project. This was a complete car when purchased that has been completely disassembled, cleaned, sanded and/or blasted and painted. White body panels were primed and painted white lacquer to preserve work while project was completed. Chassis has been modified to accept an early 60's Olds/B&M Hydro combination (not included) so the X member has been cut. Installed were Chassis Engineering front disk brakes and Chassis Engineering parallel leaf kit in the rear along with a late 60's Chevrolet Camaro/Chevelle rear end. Included are a stock, gloss black powder coated frame, original front wishbone suspension (less brakes although I may have a set stuffed away somewhere), original rear banjo rear end, radiator, complete 59AB flathead motor that spins freely, 3 speed transmission and a second set of roller wheels and tires for the original chassis setup. This is definitely a project but a lot of the hard work has already been done. Continue the hot rod setup and sell off the original parts or go stock and sell off the modified parts. I have a bunch of spare parts that can be negotiated into the purchase. Too many projects and unfortunately this one has to go.Located in long beach,ca. $4500.00 Edited October 1, 2022 by Banditomerc (see edit history) Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now