Hollander reference 1929 75 rears

[tcslr]

I have two small pieces missing on my pinion. 1929 75 Chrysler rear end is unique - I THINK the 72 parts may fit but the 1930 77 - no.

since this is a one year only ( near as I can determine) does anyone have a Hollander reference that can tell me what other Marques used that rear?

I figure Chrysler sources the rears. Hard to imagine changing casts and re-machining fir a one year run.

 

thanks, Tom

[zeke01]

It isn’t promising. From the twelfth edition oh Hollanders, 

[zeke01]

Sorry, some stuff that you didn’t need.

[zeke01]

This was under ring gears, pinions and carrier assemblies. Looks like the interchange is ‘27-‘29  65,72,75.

[viv w]

Tom,

 The Chrysler master parts list shows the model 75 ring and pinion will be the same as the model 62, 72, & 65 on the following ratios, 4,6:1,  and 4,3:1. 

The model 72 and 75 ratio 3,9:1 are the same.

The model 62, 72 and 65  ratio 4,9:1  is not listed for your 75, will it fit ?? who knows.

The model 72 and 75 can also share a 3,9:1 ratio

Model 72 also has a 3,58:1 ratio listed, but again not specified for the model 75, again will it fit??

 I'm going to send you a PM about a series 72 rear axle .

Viv.

[tcslr]

Thanks all.