jcrow Posted May 15, 2022 Share Posted May 15, 2022 I need a muffler for a large mid twenties car. It is one of those with cast iron ends and rods that go from front to back holding the sections together (stove pipe? ). I have the ends, just need the sections. Anyone reproducing? Must have been used on many cars. Any suggestions, advice appreciated. Johnny 925-963-5835 Link to comment Share on other sites More sharing options...
JFranklin Posted May 15, 2022 Share Posted May 15, 2022 (edited) A sheet metal shop is where I would start. They can measure, perforate the inner tubes and form the outer shell. It shouldn't cost more than finding a stock one. Do you know the length you will need? Edited May 15, 2022 by JFranklin Added content (see edit history) Link to comment Share on other sites More sharing options...
Akstraw Posted May 21, 2022 Share Posted May 21, 2022 Restoration Supply in Escondido had these in their catalog a few years ago, but not in stock. Maybe different now. Buyer had to drill all the holes as I recall. Link to comment Share on other sites More sharing options...
Grimy Posted May 21, 2022 Share Posted May 21, 2022 Johnny, check with Scott Henningsen, who has been reproducing take-apart mufflers for 1910s Pierces. Even if not identical, his sources for materials may be worthwhile to you. Link to comment Share on other sites More sharing options...
jcrow Posted May 22, 2022 Author Share Posted May 22, 2022 Thank you. jc Link to comment Share on other sites More sharing options...
Buffalowed Bill Posted January 31, 2023 Share Posted January 31, 2023 (edited) You could try a truck muffler catalog. It's possible to find a muffler that has the same or similar dimensions. https://www.walkerexhaust.com/products/commercial-vehicle/commercial-catalog.html Edited January 31, 2023 by Buffalowed Bill (see edit history) Link to comment Share on other sites More sharing options...
JFranklin Posted January 31, 2023 Share Posted January 31, 2023 You might try a model T Ford supply house for reproduction ends and build the length you want. Link to comment Share on other sites More sharing options...
DFeeney Posted April 30, 2023 Share Posted April 30, 2023 I have a NAPA muffler catalog that list their mufflers by dimension. You could probably find this on line. Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now