Jump to content

Need Advice!! Straightening Rear on 1966 Lincoln continental project


Omsi.95

Recommended Posts

BEF75552-854E-4DDA-BF1D-6590E9EFCCDC.jpeg.34ab45c59168a70202e6208785d67725.jpegC82D03C7-69F7-49C2-B00A-D0547A4487B0.jpeg.49fb42a7fe718676ea0310e4b674d271.jpegHello, I’m looking to restore this continental that my step dad bought me. 
The visual problem I see is the body line gap between the rear door and quarter panel. Before I weld on the new rear quarter panel, can someone give me advice on where or how to start to straighten out the unibody chassis. 

I have no experience in unibody’s, 


thank again. 
 

Edited by Omsi.95
Wrong photo uploads (see edit history)
Link to comment
Share on other sites

You will have to have the car installed on a frame machine so they can pull everything back in place. I would do a lot of research to find a shop nearby that has some experience with the 1961-1968 Lincoln as they are quite different than other uni-body cars.

Check with a local LCOC club to see if they have any recommendations.

 

https://lcoc.org/

 

Also

https://suicideslabs.com/

 

and

 

https://www.thelincolnforum.net/phpbb3/viewforum.php?f=32

 

Good Luck

 

Link to comment
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
×
×
  • Create New...