Erndog Posted April 27, 2022 Share Posted April 27, 2022 I just finished going through my starter and managed to get it all back together with one possible exception. The engaging lever bolt arrangement doesn't seem quite right and I can't find details on it anywhere. From the head of the bolt toward the other end, I have assembled as follows: bolt head, metal shroud thing, felt washer, lever, large thin metal flat washer, casing, lock washer, nut. This seems right, but I don't think there are adequate threads exposed at the end. When I tighten the nut enough to have any threads showing the lever is too tight. If it is correct, should I just back it off a bit? If anyone has photos or illustrations of the proper assembly of that portion of the starter, could you please post them? Link to comment Share on other sites More sharing options...
Erndog Posted May 27, 2022 Author Share Posted May 27, 2022 (edited) Well, since nobody could answer my question, I went ahead and test ran the starter. Works fine, so I guess, right or wrong, this is how it shall remain. Edited May 28, 2022 by Erndog (see edit history) 1 Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now