r1lark Posted April 15, 2022 Posted April 15, 2022 (edited) I have a distributor vacuum advance from an early sixties Nissan Patrol that is non-operational. NOS advances are crazy expensive IF they can be found, which is rarely. And then you still have a 60 year old diaphragm. I've searched on this forum and found very little, and a couple of companies mentioned are no longer in business. Looking for recommended companies that rebuild vacuum advances -- preferably companies that you have dealt with successfully. Thanks in advance (no pun intended ) for any help you can provide! Edited April 15, 2022 by r1lark added descriptor "distributor" (see edit history)
TerryB Posted April 15, 2022 Posted April 15, 2022 I guess this unit is so unique there are no similar units from another auto manufacturer that might work?
r1lark Posted April 15, 2022 Author Posted April 15, 2022 (edited) No, not that are known, which is why we are investigating a rebuild. Edited April 15, 2022 by r1lark (see edit history) 1
JFranklin Posted April 15, 2022 Posted April 15, 2022 It would seem to me that if the vacuum could be metered properly most any advance unit might work if a suitable bracket and arm could be fabricated.
TerryB Posted April 15, 2022 Posted April 15, 2022 1 hour ago, JFranklin said: It would seem to me that if the vacuum could be metered properly most any advance unit might work if a suitable bracket and arm could be fabricated. Yes, my thoughts too. Of course a picture of the advance would help too and the specs for the amount of advance required.
r1lark Posted April 15, 2022 Author Posted April 15, 2022 21 minutes ago, TerryB said: Yes, my thoughts too. Of course a picture of the advance would help too and the specs for the amount of advance required. The goal here is to get the advance 'rebuilt' with a new diaphragm, so it mounts and works as original. Not interested in engineering a retrofit.
TerryB Posted April 15, 2022 Posted April 15, 2022 2 minutes ago, r1lark said: The goal here is to get the advance 'rebuilt' with a new diaphragm, so it mounts and works as original. Not interested in engineering a retrofit. Ok, not trying to steer you off your path of action. All the best on your hunt for a rebuilder. You still might want to post a pic in case someone has one and may not realize what it fits.
Kornkurt Posted April 15, 2022 Posted April 15, 2022 Call Terrill Machine in Texas 254-893-2610. They rebuild them and are a reputable company. 4 1
wyankee Posted April 16, 2022 Posted April 16, 2022 I agree with Terrill Machine. I used them in the past for a 1953 Plymouth, fantastic work, great people. 2
Frank DuVal Posted April 16, 2022 Posted April 16, 2022 There is more to a diaphragm unit than just move an arm with some vacuum. The spring, length of travel, etc. are different between part numbers/designs. Also some bleed air to regulate their operating curve. Even the "simple" Corvair used about 10 different part numbers to get the curves right! Lots of aftermarket replacements are just close, not exact, to limit the number of different parts to stock. Of course, one that kinda works is better than a non-working one.😉 1
r1lark Posted April 16, 2022 Author Posted April 16, 2022 (edited) 19 hours ago, Kornkurt said: Call Terrill Machine in Texas 254-893-2610. They rebuild them and are a reputable company. Thanks Kornkurt and wyankee, I'll check them out. Edited April 16, 2022 by r1lark (see edit history)
r1lark Posted April 16, 2022 Author Posted April 16, 2022 (edited) 14 minutes ago, Frank DuVal said: There is more to a diaphragm unit than just move an arm with some vacuum. The spring, length of travel, etc. are different between part numbers/designs. Also some bleed air to regulate their operating curve. Even the "simple" Corvair used about 10 different part numbers to get the curves right! Lots of aftermarket replacements are just close, not exact, to limit the number of different parts to stock. Of course, one that kinda works is better than a non-working one.😉 For sure Frank, lots of variables! I didn't know that some vacuum advances have an air bleed. Mine still moves the arm, but just doesn't maintain a constant vacuum once pumped up. I'll check to see if there is some sort of air bleed hole on the cannister. Edited April 16, 2022 by r1lark (see edit history)
Bloo Posted April 16, 2022 Posted April 16, 2022 3 hours ago, Frank DuVal said: Also some bleed air to regulate their operating curve. What have you seen that on? Anything with a single diaphragm? Offhand, I only recall seeing it on the secondary part of dual advance units.
Frank DuVal Posted April 17, 2022 Posted April 17, 2022 On distributors, yes, I have only seen them on those dual diaphragm setups now that you mention it. On carburetors, I have seen the single diaphragm types with a bleed hole. 1
Bloo Posted April 17, 2022 Posted April 17, 2022 Oh yeah, I've seen lots on carburetors. You have to plug the hole to test them. Some make it kind of hard to do.
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now