wanted to buy/suggestions for 24 chrysler

[automaschinewerks]

hello, i am in search of kingpin and bushings parts or kit for a 1924 chrysler.  pin size is 7/8".  or any suggestions from anyone who has used another kit to modify etc. to replace kingpins in a car like this.

thanks - terry

[leomara]

Try Jay he has a great deal of early Chrysler parts.

Jay Astheimer 610-863-6955  astheime@ptd.net

1092 Constitution Ave.

Pen Argyl, PA 18072-9706

[Flivverking]

You may have to resort to bringing your spindles and king pins to a decent auto machine shop or heavy truck axle and spring shop and have them install new bushings to fit the king pins if they're not too worn. 

  You will find it very rare to find any information (that was recorded or remembered)of what someone else found to interchange or cross fit,with stuff like this..

  You should state what 1924 Chrysler you have? If the models 50,60,70 and 80 where all developed in 1924..they would all have different king pin sets ups in some way due to the size of the car,so a different model kit may not help you if you came across one. 

 

[automaschinewerks]

thanks guys, for the suggestions and help.  i have found it hard to find part numbers and cross references, but i have bushings and am going to make king pins out of 7/8" drill rod.  the owner is going to bearing specialist warehouse to get the thrust bearings.

thanks - terry