sherwood3333 Posted October 17, 2021 Share Posted October 17, 2021 can anyone tell how install a heater with out tapping into top of engine ? Link to comment Share on other sites More sharing options...
keithb7 Posted November 14, 2021 Share Posted November 14, 2021 A coolant type heater needs to tap into the cooling system. Coolant is sent to what looks like a mini radiator inside the cab. A fan pushes air across this mini radiator, the air gets hot as it exits. The rear of the cylinder head has a port, an easy, ideal convenient place to tap into the cooling system. If for some reason you cannot use this port, you'll need to get creative. You need to create a loop for the coolant to from from the engine, to the cab heater, then back to the engine. Possibly tapping into an existing coolant line on the engine somewhere. I am not aware of an easy spot to do this. Personally, I'd figure out how to repair and utilize the port at the rear of the cylinder head if at possible. Link to comment Share on other sites More sharing options...
Reg Evans Posted November 14, 2021 Share Posted November 14, 2021 Here's the head on my '35 Dodge. Note, the heater port was never tapped. I have owned many many MoPars and this was the only one without the heater port tapped out. Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now