caddy60s Posted October 4, 2021 Share Posted October 4, 2021 I have had some problems with the down shifting & finally sent my relay away and had it rebuilt. After re installing it , when I turned on the ignition the relay buzzes!! Can any body identify what the problem may be? Would appreciate your responses, Bruce Watson Link to comment Share on other sites More sharing options...
c49er Posted October 5, 2021 Share Posted October 5, 2021 Is the fuse holder on the trans relay getting hot? You most likely have a short either in the relay...not likely or the small fuse insulator ( at the bottom of fuse socket) is missing. Or the red wire feeding the transmission solenoid and or the dash pot wire on top of the carb has come undone and shorted to ground. Just a few possibilities. But why did you need to have the trans relay rebuilt in the first place...? Usually the only problem with them is loss of voltage thru the fuse holder because of corrosion. Link to comment Share on other sites More sharing options...
caddy60s Posted October 8, 2021 Author Share Posted October 8, 2021 Thank you very much for your remarks , I have made note & will follow up on your suggestions , Regards Bruce Link to comment Share on other sites More sharing options...
Chry54 Posted October 9, 2021 Share Posted October 9, 2021 asking the person who rebuilt it would be a good place to start. not implying he did anything wrong, but he will have more help to give since he is familiar with your part. chry54 Link to comment Share on other sites More sharing options...
c49er Posted October 11, 2021 Share Posted October 11, 2021 Not much in the trans relay... Two sets of points. Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now