Dodgefran Posted October 4, 2021 Share Posted October 4, 2021 Have any of you had to repair/rebuild your B pillar bottoms in a 1938 Dodge Humpback Panel or something similar? I plan on piece by piece, but could use some techniques if you've got them. Thanks Link to comment Share on other sites More sharing options...
knobless Posted October 5, 2021 Share Posted October 5, 2021 Years ago I had “ Moore’s auto salvage in SD cut me off some pieces for my 36 dodge and ship,,worked out well, I have some photos, I’ll post when I find them, Link to comment Share on other sites More sharing options...
jpage Posted October 5, 2021 Share Posted October 5, 2021 I had to repair 1 "B" pillar on my '36 dodge sedan in similar condition. I cut out the bad sections, piece by piece, not all at once, so as to keep the structure in place. I made new repair pieces and welded them as I went. Like Knobless mentioned, if the '38 cars are similar and you could find a good replacement, then that might be a better and easier route, but I doubt you'll find a good pillar for a panel. I also had to hand form and replace both rocker panels. Good luck with your project! 1 Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now