condensor fan control switch

[shelbyone]

Hey Fellas!

received my entire refurbished AC Hose today...done by Cold Hose in FL....

could not wait to re install...high line first...then low line...just to realize: they "erased" my Condensor fan control switch!!! its gone!...damn...

never asked them to remove it...so here's the question; would it work without the switch?( UH, NO) 

otherwise, they did a good job...I am going to make it snow in the TC

Edited September 16, 2021 by shelbyone
missing info (see edit history)

[Hemi Dude]

28 minutes ago, shelbyone said:

Hey Fellas!

received my entire refurbished AC Hose today...done by Cold Hose in FL....

could not wait to re install...high line first...then low line...just to realize: the erased my Condensor  fan control switch!!! its gone!

never asked them to remove it...so here's the question; would it work without the switch?

otherwise, they did a good job...

Try 3849784 Condenser fan control SWITCH at your Chrysler Dealer.

 

[shelbyone]

3 minutes ago, Hemi Dude said:

 

 

Edited September 15, 2021 by shelbyone
mistake (see edit history)

[shelbyone]

5 minutes ago, shelbyone said:

 

thanks Hemi!...still...I am mad they just kept it....

[Hemi Dude]

You should never send anything like that which is removable when you have anything rebuilt, re-housed or whatever.

[shelbyone]

Just now, Hemi Dude said:

You should never send anything like that which is removable when you have anything rebuilt, re-housed or whatever.

next time I know!!!!!!!

[shelbyone]

On 9/15/2021 at 7:50 PM, shelbyone said:

next time I know!!!!!!!

looks like this is an interchangable part:  https://www.google.com/shopping/product/12233546213484011931?client=safari&q=3849784+condenser+switch&prds=eto:1577123408043167548_0;11779056534168087816_0;3704868341308678814_0&sa=X&ved=0ahUKEwj28-H2q4LzAhVgTDABHfYcAmIQ9pwGCAU

 

checked it out today..the plug fits but the diameter does not..

Edited September 17, 2021 by shelbyone
addition (see edit history)

[shelbyone]

On 9/15/2021 at 7:50 PM, Hemi Dude said:

You should never send anything like that which is removable when you have anything rebuilt, re-housed or whatever.

they found it and send it back via express! that was a cool move!

[Reaper1]

How much did it run you?

[shelbyone]

14 minutes ago, Reaper1 said:

How much did it run you?

I send in high and low side, all together a total of 4, eliminating one canister, custom fitting & welding, all other lines also required new barbs welded on. I asked them to relocate the connections and make them R134 native...all in all, including shipping:$342 

[Reaper1]

11 minutes ago, shelbyone said:

I send in high and low side, all together a total of 4, eliminating one canister, custom fitting & welding, all other lines also required new barbs welded on. I asked them to relocate the connections and make them R134 native...all in all, including shipping:$342 

I guess with shipping that's not bad. Anymore shipping SUCKS!!

[shelbyone]

2 minutes ago, Reaper1 said:

I guess with shipping that's not bad. Anymore shipping SUCKS!!

they charged 20 to ship it all back. not too bad at all!...the good thing is; all the AC components are now new ( except for the unit next to the heater core and the actual compressor) and will perform like new! and no need to worry about 30 year old hoses...