Dodgedude37 Posted July 30, 2021 Share Posted July 30, 2021 When bought my truck decades ago the hood ornament was long gone. I have since found one, & wondering the mounting system, I see it requires a 10-32 screw, seems like it needs something else, any pics would be helpful. Link to comment Share on other sites More sharing options...
Guest Posted July 30, 2021 Share Posted July 30, 2021 Perhaps a matching backing plate on the bottom side for strength? Link to comment Share on other sites More sharing options...
keiser31 Posted July 31, 2021 Share Posted July 31, 2021 This one shows three places for screws.... https://www.ebay.com/itm/153752455324?hash=item23cc5c489c:g:LQEAAOSw~Wpd6ql5 Link to comment Share on other sites More sharing options...
Steve9 Posted July 31, 2021 Share Posted July 31, 2021 (edited) The screw wedges the ornament in place when tightened down. Works very well. I used a hex head screw for a painless, non slip screw job. I filed the end down like a pencil point as seen in keiser31’s post. Edited July 31, 2021 by Steve9 (see edit history) Link to comment Share on other sites More sharing options...
Dodgedude37 Posted August 4, 2021 Author Share Posted August 4, 2021 Thank you I understand now, should also make easier to remove for security. mine is different than the one on eBay, has a hook in back & the one wedge style screw hole. I did sharpen the screw to a dangerous point. Thanks again Dave 1 Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now