48 Chrysler, Can't bleed L. F. wheel cylinders.
I have installed a complete brake system on my 48. Steel lines, hoses, MC, Wheel cylinders and I blead R.R, L,R and the R, F, no problem!
But I can't get any fluid to pass into the L. F. cylinders.
The steel line is clear, the new hose is clear, the Cylinders do not have anything in them(I took them apart to ck).
The metal piece in the clyinder that holds the rubber seems to bottom out over the inlet holes. I only get a few drops out of the upper bleeder.
I have tried t
No, I set it to fit the shoes slightly larger, and then adjusted them and then used a special brake id. and od. gauge on the drum and made sure that the shoe diameter was a little bit smaller than the inside of the drum. (factory specks are 5 to 6 thousands_
