Wayne R Posted July 8, 2021 Share Posted July 8, 2021 While waiting for new speedo housing o ring ,plastic gear, circlip ,and seal washer, shipping is terrible just now ,from US, because of covid, etc, i decided to fit new transmission drain plug,--very easy ,marvelous , should have done it years ago to other Buicks i have owned, so when speedo housing seals eventually arrive i can drop a couple of pints to fit the seals.--Any body want tips on doing this let me know,-no problem. 1 Link to comment Share on other sites More sharing options...
NTX5467 Posted July 10, 2021 Share Posted July 10, 2021 What about adding the magnets into the inside of the oil pan, as OEM did? Link to comment Share on other sites More sharing options...
Frank DuVal Posted July 10, 2021 Share Posted July 10, 2021 Old hard drives are a great source of magnets!😉 Link to comment Share on other sites More sharing options...
Wayne R Posted July 10, 2021 Author Share Posted July 10, 2021 Thanks for that --NTX5467-- and Frank--i never thought of doing that, next filter change will do that. Link to comment Share on other sites More sharing options...
NTX5467 Posted July 11, 2021 Share Posted July 11, 2021 You can also put them on the outside of the pan, where they won't be knocked off. Also, somebody in the racer area used to have circular ones that would stick to the outside of spin-on (engine) oil filters. NTX5467 1 Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now