Jump to content

Making smaller (less than 8 1/2 x 11) one-off gaskets


carbking
 Share

Recommended Posts

I get quite a few calls from folks wanting me to sell a single carburetor gasket. It isn't going to happen; some folks understand, others appear angry.

 

Most are familiar with the old "hammer" method of cutting gaskets, but there is another way that gives better results.

 

So, at the risk of reducing my carburetor kit business ;)  for those of you wishing a single carburetor bowl to body gasket, or similar:

 

(1) Clean the casting for the gasket

(2) Place the casting on your scanner

(3) Scan the casting using Adobe Acrobat, or some other software of your choosing that will do exact dimensions copy

(4) Put a sheet of gasket material in your printer

(5) Print the scan

(6) Borrow a pair of fingernail scissors from your significant other (better yet, buy your own)

(7) Cut out the gasket.

 

Jon.

  • Like 13
  • Thanks 4
  • Haha 1
Link to comment
Share on other sites

Terry - I would LOVE to have one of the laser cutters, but too busy (or maybe too old ;) ) to learn to use the software to clean up the scans.

 

For the younger folks out there, small "home" lasers are reasonable in price. The problem for me being, that even the salesman states, cleaning the scan will take at least an hour once one has learned how to use the software.

 

A typical gasket that I cut by hand is cut maybe once in 5 years, and takes 10~15 minutes. Just not time-feasible to do the laser at my age.

 

Jon.

  • Like 2
Link to comment
Share on other sites

That's totally understandable Jon!

 

I usually scan then import into AutoCAD and trace then export to the laser cutter which saves clean-up. Since they are usually for my own use time is irrelevant (LOL)

Previously I had "tapped" out all the gaskets for the intake and water manifolds for my T-head Wisconsin project. When I got the laser cutter I just had to do them over again simply 

because it is so cool to watch! 

 

 

Link to comment
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share

×
×
  • Create New...