Pictures of hood release needed

[RobertLDuncan]

My new to me 1990 TC 16v came with a bungee cord to release the secondary latch on the hood. I found the bracket for the release rod in a bag of parts in the spare tire bin. I see two pop rivets on the underside of the center front grill. But I don't know how to orient the bracket there. Could someone post some pictures of the bracket in place for me? 

 

Thanks, 

[marty mopar]

[RobertLDuncan]

Yes, I have seen that. Where does part #22 attach? It seems to be where the push rod (#23) rests at the front of the grill.

[wild bill]

Don't have a 16v, but this is picture of my 90 v6 where push rod goes to.

[RobertLDuncan]

That's getting close. I need the other end of that rod. 

[Hemi Dude]

[Hemi Dude]

The guide for the release rod is 2x riveted to the lower lip of the black plastic grille.

[RobertLDuncan]

Thank you. That's perfect. I was trying to make it fit off to the side, rather than straight on. I now see what I need to do.