Crooker69 Posted May 14, 2021 Share Posted May 14, 2021 I bought a 58' Chevy Apache 3100 from my grandpa. I really want to fix it up and make it a everyday driver so if like to do anything I need to it to make it an everyday driver. Here's where I need help, I don't know what all I should do to get it there. I've never done this type of thing before and could use help from someone that knows what they are doing. I'll have a ton of questions so you'll have to be patient with me. The truck is in very good shape for the most part and I did but another truck that someone put a lot of body work into. Please help. Link to comment Share on other sites More sharing options...
TerryB Posted May 14, 2021 Share Posted May 14, 2021 Pictures of what it looks like now would be a good start. 4 Link to comment Share on other sites More sharing options...
a griffin Posted May 14, 2021 Share Posted May 14, 2021 What is the condition of the running gear? If it is currently running and driving, dial it in and start making short runs to gain confidence in the truck. If it's not running, figure out where the problem is and work from there. Get it running and driving and stopping. DO NOT pull the truck down to the very last nut and bolt with the expectation of doing a full restoration just yet. That is the biggest way to lose interest. 2 Link to comment Share on other sites More sharing options...
Dave39MD Posted May 14, 2021 Share Posted May 14, 2021 It is great that you have your grandpa's truck! A 58 Chevy can be a great driver just like it was built so go easy into making changes until you are sure it is something you want to do. I think the first step would be to get the owners and shop manual. Here is a good source of parts and info https://store.fillingstation.com/catalog.htm. a griffin posted good info while I was typing. Some general info on if it is running and what you see as problems would help get you more info. Dave 1 Link to comment Share on other sites More sharing options...
wayne sheldon Posted May 14, 2021 Share Posted May 14, 2021 Step side, fleetside, long bed or short bed? V8 or inline six? Manual or automatic transmission? Really beat like so many are or nice original, or modified along the way? Half ton or three-quarter ton? Do want it back to nice like when it was new, or maybe how granddad used it? Or do you want it as a canvass to create your own thing? All of these things make a big difference. And as mentioned, numerous pictures would help a lot. My dad had and drove a 1959 half ton fleetside long bed inline six for almost thirty years! It was a good truck, and served him well. 1 Link to comment Share on other sites More sharing options...
Crooker69 Posted May 14, 2021 Author Share Posted May 14, 2021 37 minutes ago, a griffin said: What is the condition of the running gear? If it is currently running and driving, dial it in and start making short runs to gain confidence in the truck. If it's not running, figure out where the problem is and work from there. Get it running and driving and stopping. DO NOT pull the truck down to the very last nut and bolt with the expectation of doing a full restoration just yet. That is the biggest way to lose interest. Thanks that's what I was going to do but I'm glad you mentioned that. Link to comment Share on other sites More sharing options...
Crooker69 Posted May 14, 2021 Author Share Posted May 14, 2021 39 minutes ago, a griffin said: What is the condition of the running gear? If it is currently running and driving, dial it in and start making short runs to gain confidence in the truck. If it's not running, figure out where the problem is and work from there. Get it running and driving and stopping. DO NOT pull the truck down to the very last nut and bolt with the expectation of doing a full restoration just yet. That is the biggest way to lose interest. My grandpa told me that he drove it to where I picked it up at but is was sitting for about 15 years Link to comment Share on other sites More sharing options...
Crooker69 Posted May 14, 2021 Author Share Posted May 14, 2021 20 minutes ago, wayne sheldon said: Step side, fleetside, long bed or short bed? V8 or inline six? Manual or automatic transmission? Really beat like so many are or nice original, or modified along the way? Half ton or three-quarter ton? Do want it back to nice like when it was new, or maybe how granddad used it? Or do you want it as a canvass to create your own thing? All of these things make a big difference. And as mentioned, numerous pictures would help a lot. My dad had and drove a 1959 half ton fleetside long bed inline six for almost thirty years! It was a good truck, and served him well. Inline 6 Link to comment Share on other sites More sharing options...
Crooker69 Posted May 14, 2021 Author Share Posted May 14, 2021 23 minutes ago, wayne sheldon said: Step side, fleetside, long bed or short bed? V8 or inline six? Manual or automatic transmission? Really beat like so many are or nice original, or modified along the way? Half ton or three-quarter ton? Do want it back to nice like when it was new, or maybe how granddad used it? Or do you want it as a canvass to create your own thing? All of these things make a big difference. And as mentioned, numerous pictures would help a lot. My dad had and drove a 1959 half ton fleetside long bed inline six for almost thirty years! It was a good truck, and served him well. Link to comment Share on other sites More sharing options...
JamesR Posted May 15, 2021 Share Posted May 15, 2021 (edited) I had a '59 when I was a kid (in 1979.) I loved it. Had a granny low, as well as a 283 (that was apparently out of a '61 Impala.) It had similar rust on the front fenders that I "fixed" with fiberglass mesh and bondo. Then I found a local body shop who had replacement rear corner cab panels, so they welded those in, and that repair lasted much longer than my fender bondo fix for some reason😄. In my view, old pickups are more straightforward to work on than cars of the same era, but I never got very far with mine, though it was a reliable daily driver all the time I owned it. Also, as working vehicles, refurbished pickups sometimes aren't held to the same standards of polish and perfection that refurbished old cars are, which can make the process a little easier for the budget minded. Try to set aside enough money to have serious rust fixed the right way, though, whether by yourself or professionals. Best of luck on your Apache. Coolest trucks ever. Edited May 15, 2021 by JamesR (see edit history) Link to comment Share on other sites More sharing options...
28 Chrysler Posted May 15, 2021 Share Posted May 15, 2021 The best thing to do is to get some old farts over to look at it. There is many guys who know these truck inside and out. Many of the younger crowd don't understand carburetors. The good thing is every part is available for this truck. 1 Link to comment Share on other sites More sharing options...
a griffin Posted May 15, 2021 Share Posted May 15, 2021 It looks like grandpa got his moneys worth out of the truck before he parked it. So the question is this, why did he park it? Link to comment Share on other sites More sharing options...
Walt G Posted May 15, 2021 Share Posted May 15, 2021 1 hour ago, 28 Chrysler said: The best thing to do is to get some old farts over to look at it To understand the meaning of the word FART - here on long island there was a club of them some decades ago and it was Friend's of Ancient Road Transportation. 2 Link to comment Share on other sites More sharing options...
edinmass Posted May 15, 2021 Share Posted May 15, 2021 39 minutes ago, Walt G said: To understand the meaning of the word FART - here on long island there was a club of them some decades ago and it was Friend's of Ancient Road Transportation. They are still going strong........and actively touring. Link to comment Share on other sites More sharing options...
MochetVelo Posted May 15, 2021 Share Posted May 15, 2021 Do you belong to the AACA? If not, then join, find you nearest chapter and attend a meeting, bringing some photos of your truck. You should be able to get a couple guys interested enough to come over and look at it. That's how you would get your best advice. They will want to know if the engine turns, if the cylinders have compression, if the block is cracked, radiator clogged, etc. Find literature on the truck; there is a lot online. Also, check out the Chevrolet clubs. There are several of them. Finally, try to get to Hershey this Fall. You will meet people who share your interest there. Phil 1 Link to comment Share on other sites More sharing options...
TerryB Posted May 16, 2021 Share Posted May 16, 2021 A pic from the internet, the fender rust must be a common problem. 2 Link to comment Share on other sites More sharing options...
trucktony Posted November 30, 2021 Share Posted November 30, 2021 I build a few through the years I am building one right now from leftover parts the previous owner toke it apart and the shed that hold all the sheet metal burned down to the ground so I bought the leftover chassis and cab an started on it with what I got Toke me around 6 months to make it driveable this winter I am going to finish it sealed the skin with owatrol and thats how it's going to stay alway's a lot of fun with those truck and there easy to tinker on good luck with your build Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now