jimkf Posted May 5, 2021 Share Posted May 5, 2021 I have decided to thin my parts stock of Kaiser, Frazer and Henry J parts. No lists, either post wants here or message me thru this site. Located in northern Ohio for those who may be nearby. I have NOS and good used bits and pieces for most every year KF produced. Link to comment Share on other sites More sharing options...
stroy0809 Posted May 25, 2021 Share Posted May 25, 2021 I just bought a Kaiser Darrin at auction. I was thinking of adding a supercharger to the F engine. Is it a difficult process? Do u have any parts to start my search? Link to comment Share on other sites More sharing options...
Tim Schmidt Posted August 9, 2021 Share Posted August 9, 2021 Sir: As I finish another project, I'm accumulating parts for my upcoming Darrin restoration. I need various parts (wiper motor and linkage, turn signal lever and mechanism, horns, trunk lock bezel--to name a few). It would be easier for me to contact you directly instead of through the forum. I'm new to the aaca so I don't know how this is done. Please advise. Thanks, TTS Link to comment Share on other sites More sharing options...
jimkf Posted August 10, 2021 Author Share Posted August 10, 2021 Hello - I don't have many Darrin unique bits to sell but I do have some stuff that is more generic Kaiser that were used on the Darrin as well. If you click on my user name you'll be taken to a page that has a Message button. That will allow you to send a message without posting here. Feel free to send a list of wants and I'll let you know what I have available. Link to comment Share on other sites More sharing options...
Gym Greenwald Posted October 19, 2021 Share Posted October 19, 2021 Hi Jim, I am attempting to track down the windshield rubber for a 1951 Golden Dragon, the four door model. I also need new fuel door springs, if you happen to have some of those. Any help towards my goal would be tremendous. Thanks GYM Link to comment Share on other sites More sharing options...
jimkf Posted October 21, 2021 Author Share Posted October 21, 2021 Might have the fuel door spring, I'll check. Can't help with the gasket but you can check with Rudy Phillips at rudyskfparts @ sbcglobal.net. He had some reproduced. Link to comment Share on other sites More sharing options...
DFeeney Posted November 3, 2021 Share Posted November 3, 2021 Hello, I am looking for a Kaiser steering box and column for a project. I have been told 1951-1955 are the same. Do you have any? Thanks, Don Link to comment Share on other sites More sharing options...
nick8086 Posted November 4, 2021 Share Posted November 4, 2021 Not sure if I still have one.. I sold the H/J one for good money to go on a 1963 car.. He also picked up the frame I had.. Link to comment Share on other sites More sharing options...
jimkf Posted November 7, 2021 Author Share Posted November 7, 2021 On 11/3/2021 at 7:33 PM, DFeeney said: Hello, I am looking for a Kaiser steering box and column for a project. I have been told 1951-1955 are the same. Do you have any? Thanks, Don I think I have a column and box from a 51 Kaiser that was parted out many years ago. I'll check and advise. Link to comment Share on other sites More sharing options...
DFeeney Posted November 7, 2021 Share Posted November 7, 2021 Hello, I would be interested to find out the distance from the center of the steering wheel shaft to the end of the Pittman arm. thanks, Don Link to comment Share on other sites More sharing options...
Old buicks 2 Posted November 8, 2021 Share Posted November 8, 2021 jimkf, set you a private email Tom Link to comment Share on other sites More sharing options...
DFeeney Posted November 9, 2021 Share Posted November 9, 2021 Hello Tom, I have not received you E-mail. Could you send it again, Thanks, Don Link to comment Share on other sites More sharing options...
Old buicks 2 Posted November 10, 2021 Share Posted November 10, 2021 DFeeney, check you mail top right corner of the main page. We are looking for a fuel pump for the 52 Fraizer Tom Link to comment Share on other sites More sharing options...
Brent in MO Posted December 3, 2021 Share Posted December 3, 2021 JimKF - I'm looking for the lower hood trim for a '51 Henry J, as well as all of the interior upholstered panels for trim code 3456 for the '51 Henry J. Also looking for both bumpers for the same car. Link to comment Share on other sites More sharing options...
jimkf Posted December 3, 2021 Author Share Posted December 3, 2021 3 hours ago, Brent in MO said: JimKF - I'm looking for the lower hood trim for a '51 Henry J, as well as all of the interior upholstered panels for trim code 3456 for the '51 Henry J. Also looking for both bumpers for the same car. Sorry, I can't be of help. Link to comment Share on other sites More sharing options...
Brent in MO Posted December 4, 2021 Share Posted December 4, 2021 Thanks for your reply. Link to comment Share on other sites More sharing options...
TK510 Posted January 18, 2022 Share Posted January 18, 2022 Looking for a Carter WGD781S carburetor for 51 Frazer. Link to comment Share on other sites More sharing options...
nick8086 Posted January 18, 2022 Share Posted January 18, 2022 (edited) 1 hour ago, TK510 said: Looking for a Carter WGD781S carburetor for 51 Frazer. You may look for this - carb 813s 774 Base.. 170t72s Frazer The 781s is for the kaiser only.. Not Frazer.. I think I have three of them. This one is new in the box.. Edited January 18, 2022 by nick8086 (see edit history) 1 Link to comment Share on other sites More sharing options...
carbking Posted January 18, 2022 Share Posted January 18, 2022 It is true the 781s was originally not used on the Frazer, but K-F used it as a service replacement carb for the WGD 813s on the 1951 Frazer. If doing "numbers matching" then one would need to find a Carter WGD 813s Jon 1 Link to comment Share on other sites More sharing options...
nick8086 Posted January 19, 2022 Share Posted January 19, 2022 Thanks Jon.. All my stuff is in storage.. It is winter here in Nebraska.. I think I listed that part 2 years ago and had a no sale.. I have all my dads stuff from 45 years of collecting.. 2 Link to comment Share on other sites More sharing options...
TK510 Posted January 19, 2022 Share Posted January 19, 2022 I am also in Nebraska, Omaha area. Packed up the Frazer until it gets warmer out. I am assuming the 781S will work fine as a replacement for the 813S. The car currently has a Rochester 2GV (divorced choke which is not connected). Not sure how it ever ran well with this carb on it. Found an original air cleaner for it and want to get a proper carb. Thanks for everyone's responses. Nick8086, reach out to me sometime, we may need more parts. Link to comment Share on other sites More sharing options...
nick8086 Posted January 21, 2022 Share Posted January 21, 2022 (edited) it took me 8 years to find this one.. 2094S The first pick was not correct and could not find a kit for it.. Still not sure what I did with it.. Edited January 21, 2022 by nick8086 (see edit history) Link to comment Share on other sites More sharing options...
jimkf Posted January 22, 2022 Author Share Posted January 22, 2022 On 1/19/2022 at 12:45 PM, TK510 said: I am also in Nebraska, Omaha area. Packed up the Frazer until it gets warmer out. I am assuming the 781S will work fine as a replacement for the 813S. The car currently has a Rochester 2GV (divorced choke which is not connected). Not sure how it ever ran well with this carb on it. Found an original air cleaner for it and want to get a proper carb. Thanks for everyone's responses. Nick8086, reach out to me sometime, we may need more parts. I might have an 813S. I will check my stock and advise. And yes, the 781S will work. I have quite a few good rebuildables. Link to comment Share on other sites More sharing options...
nick8086 Posted January 31, 2022 Share Posted January 31, 2022 TK510 - you have only four months.. My trips to Elkhorn NE. will end.. Over the summer we will stop by the Peregrine in Omaha.. My stuff will still be here . Not in a big rush.. Link to comment Share on other sites More sharing options...
Jbculkin Posted March 28, 2022 Share Posted March 28, 2022 Sorry if I'm reviving a dead thread, but do you have a supersonic head I could buy for my 50's Henry j? Link to comment Share on other sites More sharing options...
jimkf Posted April 3, 2022 Author Share Posted April 3, 2022 Four or six cylinder Henry J? Link to comment Share on other sites More sharing options...
jbrownnc9 Posted April 8, 2022 Share Posted April 8, 2022 I'm new to this forum so I'm just now searching through the posts. I have a 51 Kaiser Deluxe. I'm looking for oil bath air cleaner steering wheel thanks in advance! -Jason Link to comment Share on other sites More sharing options...
jimkf Posted April 17, 2022 Author Share Posted April 17, 2022 On 4/7/2022 at 8:32 PM, jbrownnc9 said: I'm new to this forum so I'm just now searching through the posts. I have a 51 Kaiser Deluxe. I'm looking for oil bath air cleaner steering wheel thanks in advance! -Jason I do have an air cleaner but cannot help with the steering wheel. They were made of a type of plastic that disintegrated with age so NOS units do not exist. The KF club remanufactured some several years ago and occasionally one appears on ebay. I will post pix of the air cleaner Link to comment Share on other sites More sharing options...
G Cabrera Posted June 1, 2022 Share Posted June 1, 2022 New here and saw your thread. I'm looking for a right side turn signal for my 51 Henry J grille. Can you help ? Link to comment Share on other sites More sharing options...
jimkf Posted June 3, 2022 Author Share Posted June 3, 2022 On 6/1/2022 at 7:59 AM, G Cabrera said: New here and saw your thread. I'm looking for a right side turn signal for my 51 Henry J grille. Can you help ? Are you looking for the housing, bezel, or the lens. I do have a decent used housing and lens and might have a bezel. Let me know what you're looking for. Thx Link to comment Share on other sites More sharing options...
Jims48olds Posted June 6, 2022 Share Posted June 6, 2022 I am trying to find someone familiar with Kaisers. I have a friend whose father passed away earlier this year. He left behind two kaisers, a ford pinto and a 72 mercury cougar. They need to sell the house and no one in the family wants the cars. None of them are running. The man who owned them has been accumulating parts for these cars. These folks are in Independence Ohio and would like to consult with someone who has some expertise. Would you be interested in speaking with them? I have not seen these cars so I can't speak for condition. If you are not interested, possibly you can direct them to someone who would be interested. Thanks Jim Hollingsworth Link to comment Share on other sites More sharing options...
jimkf Posted June 7, 2022 Author Share Posted June 7, 2022 18 hours ago, Jims48olds said: I am trying to find someone familiar with Kaisers. I have a friend whose father passed away earlier this year. He left behind two kaisers, a ford pinto and a 72 mercury cougar. They need to sell the house and no one in the family wants the cars. None of them are running. The man who owned them has been accumulating parts for these cars. These folks are in Independence Ohio and would like to consult with someone who has some expertise. Would you be interested in speaking with them? I have not seen these cars so I can't speak for condition. If you are not interested, possibly you can direct them to someone who would be interested. Thanks Jim Hollingsworth I am also in northern Ohio and may know the fellow you mention. Reaching out via PM. Link to comment Share on other sites More sharing options...
Minorwho Posted April 12, 2023 Share Posted April 12, 2023 Hello I'm new here, do you have a distributor for a 1951 Kaiser Deluxe? Thank you in advance for your time and best rehards! Link to comment Share on other sites More sharing options...
jimkf Posted April 22, 2023 Author Share Posted April 22, 2023 On 4/11/2023 at 8:45 PM, Minorwho said: Hello I'm new here, do you have a distributor for a 1951 Kaiser Deluxe? Thank you in advance for your time and best rehards! Sorry...just saw this. Both Delco and Autolite distributors were used in 1951. Which are you looking for? Link to comment Share on other sites More sharing options...
Richard L Posted July 12, 2023 Share Posted July 12, 2023 47 Frazer Manhattan, looking for a complete hood latch assembly. Can you help? Link to comment Share on other sites More sharing options...
jimkf Posted July 16, 2023 Author Share Posted July 16, 2023 On 7/11/2023 at 9:45 PM, Richard L said: 47 Frazer Manhattan, looking for a complete hood latch assembly. Can you help? I probably have the latch itself, the part that's controlled by the cable. I doubt I have the upper part that mounts on the hood itself. I'll check when I get back to the shop this week. Link to comment Share on other sites More sharing options...
jimkf Posted July 21, 2023 Author Share Posted July 21, 2023 On 7/16/2023 at 5:10 PM, jimkf said: I probably have the latch itself, the part that's controlled by the cable. I doubt I have the upper part that mounts on the hood itself. I'll check when I get back to the shop this week. At this time, I do not have a good latch for the 47-48 cars. Link to comment Share on other sites More sharing options...
Tedd Z Posted October 20, 2023 Share Posted October 20, 2023 I am looking for the lower front shock absorber washers (two per side) on a Henry J lower control arm. My name is Tedd Zamjahn - teddwzamjahn@gmail.com Link to comment Share on other sites More sharing options...
nick8086 Posted October 21, 2023 Share Posted October 21, 2023 6 hours ago, Tedd Z said: I am looking for the lower front shock absorber washers (two per side) on a Henry J lower control arm. My name is Tedd Zamjahn - teddwzamjahn@gmail.com If you post a picture.. I may have one.. Link to comment Share on other sites More sharing options...
kidd65 Posted December 17, 2023 Share Posted December 17, 2023 I am looking for a center windshield post for my 1952 Henry J. It has been over twenty years since I removed the old one and now I am trying to find it. I believe it is a 2-piece part--the exterior stainless piece and the interior half. Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now