Jump to content

Oil pan felts


Recommended Posts

Just got my parts order in from Meyers great people to talk to My car is a 25 4 cyl 12 volt I see where the front and rear felts go but can’t see where the third one would go Any help would be great pictures too. John

Link to comment
Share on other sites

There should be four pieces in the felt set. One goes in the nose of the pan to bear on the front engine mount surround, two in the channels at rear which flare out under the block and the fourth is glued with gasket cement between the grooves on the rear main bearing cap.  This one bears against the rear pan baffle. Any oil that manages to get past it is returned to the pan by the pipe in the baffle. 

Link to comment
Share on other sites

I just received a full gasket set and there are four cork pieces. I asked if the kit had felt seals and the seller supplied two felt seals. Do some kits have felt and other have cork seals? I’d prefer to run felts as I had no leaks with them since the last rebuild 30 years ago.

062F9754-79BF-4D12-B04A-1153E458A958.jpeg

Link to comment
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share

×
×
  • Create New...