Jump to content

Paint Spray Guns - HVLP versus LVLP


RansomEli
 Share

Recommended Posts

Been painting cars as a hobbyist for years. Early on using a Binks Model 16, then switching to HVLP (high volume low pressure). Now thinking of getting an LVLP (low volume low pressure).

 

Supposedly, the advantage of LVLP is that it does a better job than HVLP with clear coat and single-stage paint. Less volume but finer atomization. Takes longer to paint but you can lay down a much glossier finish (before color sanding).

 

I've heard the advantages of HVLP are in spraying primer/surfacer and base coats.

 

Thinking of getting an LVLP gun. Has anyone used one? Any comments or recommendations?

 

I have been spraying acrylic lacquer but may start doing some base coat/clearcoat in the future. Contrary to other members' opinions, I still prefer the look of a well-done lacquer finish. Greater depth and the colors seem warmer.

 

Plus, there are a lot of good memories associated with the smell of lacquer paint and thinner. 

 

Link to comment
Share on other sites

In 2001 I bought from Tip a HVLP spray system.  It also put out heated air, so no  water drops. i did two full restorations on 63 Pontiacs and a couple small respray jobs. From epoxy primer to clear coat. Lot of compliments on my paint jobs. But as you know there is the wet sanding and compounding & polish.  Just my 2 cents.

  • Like 1
Link to comment
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share

×
×
  • Create New...