Jump to content

changing rear shocks/strut on 88/89 reatta


Recommended Posts

Well after searching for any info i could find on help with trying to remove and replace the rear

shocks, I couldn't find any hints or tricks that helped. after several hours of thought, I finally realized my solution! Use a sawzall and cut the top bolt off flush with the top of the nut. (4 1/2"

grinder will not give enough room to use) Then use a 4 1/2" grinder with a cut off wheel and cut grooves in the stainless  rod verticle. Then you will be able to hold the the rod with a pipe wrench. After doing this I changed both in about 2 1/2 hours or so. mind you they were the originals. Thank y'all for all the information I have already used and the info to come. I hope this will help someone else also. ( cut grooves low as possible on rod to the shock body. then the pipe wrench will hold the rod itself. leaving both hands free to torque the top nut off.)

Link to post
Share on other sites

I don't have a plasma cutter and I really wasn't too crazy about using a cutting torch due to the gas fill tube is within a

foot. So this is what worked for me. Maybe it will for someone else. Every hint or suggestion I found and tried didn't work in my case. But on same token many thanks for all the things I have learned since buying and trying to save 

my car. Before someone mentions it, I did also remove the plastic caps and use a t45 torx. The holes were too rusted.

I'm pretty sure they were the factory shocks. 

Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
×
×
  • Create New...