BrushGuy 4 Posted March 13 Share Posted March 13 Wondering if anyone might have a Liberty step plate they could loan or share detailed dimensions and photos of. I have the wild hair that I would like to try to fabricate a pattern for casting using a 3D printer. Any help would be greatly appreciated. Link to post Share on other sites
Simon Anderson 13 Posted March 30 Share Posted March 30 This may help you Link to post Share on other sites
BrushGuy 4 Posted March 30 Author Share Posted March 30 Thanks Simon.....if you could send the length and width dimensions for the rectangle with the bolt holes, I believe I can figure it out and make a pattern. Much appreciated......Have a great day. John Link to post Share on other sites
Ben Popadak 41 Posted March 30 Share Posted March 30 If the photo above is of an original Brush Liberty step plate then you should not need to cast up the step part at least. I've been looking for that style of step plate off and on for some time now. The step plate with a 5" diameter pad is used on the 1902 Rambler and one step plate on an original frame I have is rotted off at the step. I bought one similar off ebay years ago only to find out it was 4 1/4" diameter if I remember right. Too small for my needs but I finally got a 5" one a month ago. Keep looking on ebay for the 4 1/4" step. Be patient and use buggy step or carriage step to whittle down the pile. The down comer should be able to be reproduced by a good welder/ fabricator, should you get good dimensions. Good luck. Link to post Share on other sites
BrushGuy 4 Posted April 1 Author Share Posted April 1 Thanks for the added dimensions....and info. Link to post Share on other sites
caddyshack 114 Posted April 8 Share Posted April 8 Any photos out there of an original Liberty step plate? I have only seen one, and that was at Homer Edmiston's auction many years ago. That step plate had a Brush logo, very similar to early Cadillac step plates. Link to post Share on other sites
BrushGuy 4 Posted April 11 Author Share Posted April 11 I have never seen that one..... Link to post Share on other sites
Simon Anderson 13 Posted April 11 Share Posted April 11 Are my steps liberty steps in the pictures? I was told they where Brush Link to post Share on other sites
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now