Jump to content

rear inside tailgate handle/latch


Recommended Posts

I got some reproduction tailgate hardware from this place a long long time ago. I found references to them online as recent as 2017. I don't know if they are still around. 

Wagon Works 

213 S.W. Kline

Ankenny Iowa 50021

515 964 5085  evenings

 

All the hardware that was still with my car I was able to use again by sandblasting or Evapo Rust. It was all rust pitted. I made it look good by skimming with bondo or multple coats of SEM high build spray can primer and lots of sanding. It was all painted. The outside handle is stainless. 

Link to comment
Share on other sites

www.evapo-rust.com         Great stuff. Non toxic rust remover. Will only dissolve rust. Will not harm rubber, plating, sound steel and iron, nonferrous metal. Heat makes it work faster. 

Link to comment
Share on other sites

Posted (edited)

Thanks for the leads. Wagon Works had the exact hardware used on the international. Treehouse had alot of hardware I didn't know about, but did not have the needed hardware (but a good future source). Again, thank you both for taking the time to respond and provide good information- I really appreciate it. 

 

Thanks again for the help, guys!  The Wagon Works guy had an old International pickup when he was a kid, so he was fun to talk to- nice guy. 

Edited by blind pew (see edit history)
Link to comment
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share

×
×
  • Create New...