Jump to content

29 Olds Landau Deluxe Fuel Sending Unit


Steve Seguin

Recommended Posts

Good day, I have recently acquired a 1929 Oldsmobile F29 Landau Deluxe. It is an older restoration by a gentleman who once ran a Chev/Olds dealership in a small town in Ontario, Canada. It had been sitting for about 9 years so I removed the gas tank to clean out any dirt or rust. The previous owner had rebuilt the tank using galvanized sheet metal but it still was rusty inside. I plan to send the tank out to be sand blasted and sealed. The sending unit is the fluid type as is the fuel guage on my dash. I don't know if it can be salvaged or if a replacement is available. Any suggestions on a way forward would be appreciated. Presently I have only one fuel line going from the tank to the engine compartment. If you are familiar with this setup I could use some guidance. Steve

 

 

 

 

IMG_20210115_141929423.thumb.jpg.c95e7bc0e8d7d400d14a6f768b0f056d.jpgIMG_20210120_145131269.thumb.jpg.ed34551793a4ca37af57bb6705fb0ce9.jpgIMG_20210120_144951651.thumb.jpg.d17cd8e4516ce0ec71ea1adcd2bedd3e.jpg

Link to comment
Share on other sites

https://packardinfo.com/xoops/html/modules/newbb/viewtopic.php?topic_id=6512&forum=1&post_id=70322     Lots of info here to explain system and use . I have restored four of them and they DO work if you pay careful attention to the fine points. And they are all fine points . Best Wishes . I love your car !

Link to comment
Share on other sites

Contact: KM Lifestyle Mfg. 14 Clarendon Rd. Auburn,Ma. 01501.Their phone number is (508)792-9500. E-mail is kmlifestyle@hotmail.com. They rebuilt a sending unit for a 1932 Pierce-Arrow that we are working on. Nice job and fairly quick turnaround. Nice looking Oldsmobile.

Link to comment
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
×
×
  • Create New...