vette-kid Posted January 16, 2021 Share Posted January 16, 2021 Anyone know how to get this open to access the bulb and wire? Link to comment Share on other sites More sharing options...
Scott Bonesteel Posted January 17, 2021 Share Posted January 17, 2021 The outside chrome ring and the lens comes out as a unit. The switch stays put with the body of the light. The outside ring has 4 lightly spring loaded tabs that stick straight up into the body of the light. There are no screws or clips involved. I will shoot a couple of pictures to you shortly, showing one disassembled. To remove, I would just try to slip my fingers under the outside of the chrome lip on the long sides of the lip and simply pull down, perhaps with a slight wiggle. Be careful as the glass lens will come with the chrome lip. The body will be screwed into the roof bows and the switch, as well as the switch lever, will stay attached. Link to comment Share on other sites More sharing options...
Scott Bonesteel Posted January 17, 2021 Share Posted January 17, 2021 Couple of photos of the dome light disassembled so you can see the tabs that hold it together. Link to comment Share on other sites More sharing options...
vette-kid Posted January 18, 2021 Author Share Posted January 18, 2021 Thanks. That's kind of what I figured but didn't want to pull to hard until I knew for sure. It was a little stubborn but came out fine. Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now