Jump to content

Recommended Posts

I finally decided to change out the '90 steering wheel in my blue coupe with one from an '89 Reatta badge/Riviera wheel.

Removal and installation went well.  I cut off the air bag connector and spliced a 1/4 W, 4.7 ohm resistor between the yellow and green wires.

From my research I thought this set-up would "fool" the computer to think the SIR was still wired in.  However I still get the ELECTRICAL PROBLEM and    INFLATABLE RESTRAINT lights on my IPC.  Should I use a different size resistor?

Thanks,

S

IMG_2894.JPG

LLkUGsd2S%KhmlPQ7%5dag.jpg

qjir7D5xTK+eSqdVEX3nwA.jpg

  • Like 1
Link to post
Share on other sites

That's 1/4W. I'd be a bit concerned about load. Are you able to measure the voltage drop across the resistor ?

Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
×
×
  • Create New...