Alan M Posted January 9, 2021 Share Posted January 9, 2021 I need 1 or two of the male fittings as in the attached picture. When tightened, the fitting is compressed onto the tubing. Threads are 3/8"-24 and the tubing is 3/16". Thank you, Link to comment Share on other sites More sharing options...
nickelroadster Posted January 10, 2021 Share Posted January 10, 2021 II believe that you need to flare the tubing yourself. McMaster car has tubing and the fittings Link to comment Share on other sites More sharing options...
sagefinds Posted January 10, 2021 Share Posted January 10, 2021 That is not a flared fitting. When the nut on the tubing is screwed into the T fitting which is tapered inside,it squeezes the thin end of the nut against the tubing and seals it. NAPA may actually have the nut fittings,I would certainly try there first. Link to comment Share on other sites More sharing options...
Bloo Posted January 10, 2021 Share Posted January 10, 2021 That is a "threaded sleeve" fitting. They are available at Blackhawk Supply online. 1 Link to comment Share on other sites More sharing options...
Oregon Desert model 45 Posted January 10, 2021 Share Posted January 10, 2021 3/16 fitting is part number 6100x3 Napa should carry these Link to comment Share on other sites More sharing options...
Alan M Posted January 10, 2021 Author Share Posted January 10, 2021 Thank you for the help. My Napa crew said they had never seen one. The Blackhawk lead was SPOT ON. They are ordered and on the way. You made my 82nd birthday! Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now